Product Description

Controls home invading insects, lawn insects, insects on ornamentals plus trench and fence post termite recommendations.
Insects Controlled: Borers, Bark Beetles, Aphids, Bagworms, Sod Webworms, Mosquitoes, Ants, Beetles, Cockroaches, Earwigs, Mole Crickets, Spiders and many others listed on the label.
Application Rate:
Consult label for specific application instructions and rates to control targeted insects.
HOME INVADING PESTS (OUTDOOR USE ONLY) MIXING INSTRUCTIONS Mix 1.6 fluid ozs. (3 1/4 Tablespoons) of this product per 1 gallon of spray solution to make a 0.5% spray emulsion {1 fluid oz. = 2 Tablespoons (T) = 6 teaspoons (tsp.)}. Do not use utensils such as spoons and measuring cups for food purposes after use with pesticides.
HOW TO APPLY SPOT TREATMENT ? Apply a 0.5% emulsion as a pin stream low-pressure spray or as a paint-on application with a paintbrush. ? Treat where pests are found or entry points of the structure such as window frames, doorways, porches, patios and foundation. ? Spot-treatment may also be made to garages, garbage cans, and garbage areas. ? DO NOT apply indoors (including crawl spaces). PERIMETER APPLICATION: ? Spray a 6 to 8 foot wide band of soil around the perimeter of the house. Treat the foundation wall to a height of 2 to 3 feet. Use a spray volume of 2 to 10 gallons of 0.5% emulsion per 1,000 square feet. If mulch or debris is present, a higher volume application rate may be needed to ensure adequate coverage. Note: Residual control will vary depending on exposure of the treated area to weathering conditions (temperature, sunlight, moisture). Retreat on a monthly schedule while Insects are likely to be active.
WOOD DESTROYING PESTS: ? Localized Areas Outdoors: For the control of Insects such as Termites, Bees, Carpenter Ants and Wood Infesting Beetles in localized above-ground areas of infested wood around structures, apply a 0.5% emulsion to voids and galleries in damaged wood and in spaces between wooden members of a structure and between wood and foundations where wood is vulnerable. Apply either as a spray or paint-on application. For Termites, the purpose of application is to destroy workers or winged reproductive forms, which may be present at the time of treatment. This product is not designed for preventative use and should only be applied when Pests appear. This application is not a substitute for soil or foundation treatment. For active infestations inside a structure, consult a licensed pest control service. ? Use a hose-end sprayer or sprinkling can to deliver a coarse drenching spray to treat stored lumber or woodpiles. Stored wood can be used for lumber one month after treatment. Do not apply inside structures. ? Repeat treatment as necessary, but not more frequently than once a month. For active Termite infestation, consult a professional pest control applicator.
LAWN PESTS This product can be applied to lawns adjacent to or around private homes, duplexes, townhouses, condominiums, house trailers, carports, garages, fence lines, storage sheds, barns, and other residential areas where pests congregate. MIXING INSTRUCTIONS Prepare an emulsion by mixing 0.4 to 0.8 fluid ozs. (2 1/2 to 5 teaspoons) of this product in sufficient volume of water to cover 1,000 sq. ft. (approximately 4 to 25 gallons of water). {1 fluid oz. = 2 Tablespoons (T) = 6 teaspoons (tsp.)}. Do not use utensils such as spoons and measuring cups for food purposes after use with pesticides.