SIROMARK BRANDING PAINT BLUE 1.06GL

Product Description

SI-RO-MARK fluid is the only sheep marking fluid approved as properly scourable by all of the world's leading wool processors.
Commonly used with Premier Branding Irons.
-The latest formulation has been tested by CSIRO and proven to be scourable, though obviously the most scourable mark is no mark at all.
-SI-RO-MARK is available from sheep and wool supply firms throughout the USA. If you do not find it at your farm and ranch store, have them contact Premier. (We're the national importer and distributor.)

Specs
-1.06 gallon
-Made in Australia specifically for use on sheep as a marking fluid

How to Use
-Shake tin and stir well with a broad flat paddle before using.
-Dip the face of the Premier Branding Iron in the fluid. Let the paint drip off the iron (into the can) to remove excess paint.
-Press firmly against the sheep.
-Let the sheep go after branding to prevent rubbing and smearing.

DO
Mix paint (shake/stir) well.
In cold climates, set the can in a warm room or warm water bath for 5-10 minutes as the paint thickens when cool.
Use thin paint brands, not thick. The thicker the brand, the more paint is applied that needs to be or can't be washed out later.
During application, let the paint drip off the iron (into the can) to remove excess paint.
Brand on head, top of shoulders or neck. (Avoid the middle of the back or side for branding. This places paint in the highest value portion of the fleece.)
DO NOT
Put paint in a fire to warm or thin it
Mix paints from different manufacturers
Let paint freeze
Dilute unless otherwise directed by the manufacturer (consult the label)

Precautions
Excessive application should be avoided as it may result in discoloration after scouring. Do not dilute with other solvents as this practice will cause the brand to become non-scourable.
Marking will last up to 2-4 months with variables (such as weather, wool etc).